Please use this identifier to cite or link to this item: https://repositorio.ufjf.br/jspui/handle/ufjf/7126
Files in This Item:
File Description SizeFormat 
julianorochapereira.pdf3.66 MBAdobe PDFThumbnail
View/Open
Type: Dissertação
Title: Caracterização físico-química, reológica e sensorial de méis comercializados em Minas Gerais
Author: Pereira, Juliano Rocha
First Advisor: Silva, Mauricio Henriques Louzada
Co-Advisor: Denadai, Ângelo Márcio Leite
Co-Advisor: Campos, André Narvaes da Rocha
Referee Member: Oliveira, Fabíola Cristina de
Referee Member: Silva, Vanessa Riani Olmi
Resumo: O mel que é um produto natural, produzido pelas abelhas, pode ser considerado o alimento mais complexo encontrado na natureza. Essa complexidade em sua composição é dependente do clima, solo, tipo de abelha e principalmente do tipo floral em que são coletados os néctares. Suas características físico-químicas são importantes parâmetros para se definir, quantificar e caracterizar sua qualidade. Assim, os parâmetros umidade, sacarose, glicose, frutose, acidez, atividade diastática, hidroximetilfurfural (HMF), cinzas e sólidos insolúveis, constituem o padrão de qualidade e identidade do mel. O objetivo desse trabalho foi determinar as características físico-químicas, reológicas e sensoriais de méis comercializados em 6 mesorregiões de Minas Gerais. Ainda sim, verificar se há possíveis adulterações, influência das floradas e regiões sobre os parâmetros físico-químicos e reológicos e a influência das floradas sobre a aceitação sensorial. A utilização de análises estatísticas como a Análise de Componentes Principais (ACP) e Agrupamento foram aplicados sobre os resultados físico-químicos a fim de diferenciar os méis. As análises de Mapa de Preferência e teste CATA (check-all-that-apply) foram utilizadas na avaliação sensorial. Os resultados mostraram que o teor de umidade dos méis variou entre 14,26 e 18,42 g/100g. A acidez livre ficou entre 14,16 a 34,87 meq/Kg. A condutividade elétrica oscilou entre 0,285 e 0,911 mS.cm-1. Os teores de cinza variaram entre 0,18 e 0,53%. Os teores de sólidos insolúveis ficaram abaixo de 0,1 g/ 100g. A quantidade de HMF ficou abaixo de 60mg/Kg. A atividade diastática com exceção das amostras de Eucalipto da Zona da Mata e Laranjeira da região Sul, mostraram valores dentro da legislação brasileira (mínimo 8). O pH oscilou entre 3,86 a 4,52 e o Brix ficou entre 79,40 a 83,43. As amostras exibiram maiores teores de frutose (35,86 – 41,50 g/100g) e menores teores de glicose (26,30 – 34,48 g/100g). Os teores de sacarose, com exceção da amostra Assa-Peixe da região Central, exibiram valores dentro do permitido pela legislação brasileira (6,0 g/100g). A razão frutose/glicose variou entre 1,10 e 1,36. Os valores de viscosidade plástica oscilaram entre 18,92 a 64,39 Pa.s-1. Todas as amostras de mel apresentaram comportamento próximo do newtonianos e com baixa pseudoplasticidade. O modelo matemático de Ostwald de Waele forneceu uma boa descrição da viscosidade plástica dos méis. A utilização de análises dos componentes principais entre mesorregiões e floradas mostrou que os parâmetros físico-químicos viscosidade, sacarose, pH e cinzas podem diferenciar méis das mesorregiões Triângulo Mineiro (TM) e Vale do Jequitinhonha e Mucuri (VJM). Os resultados da análise sensorial indicou que houve uma preferência para as floradas Velame e Silvestre no atributo sabor. Eucalipto, Assa-Peixe e Velame no atributo textura. Silvestre, Marmeleiro e Velame no atributo aroma. Florada Assa-Peixe pelo atributo aparência e Silvestre pelo atributo coloração. Floradas Eucalipto e Silvestre foram as que tiveram maior preferência no atributo impressão global, sendo essas duas floradas, as mais comercializadas em Minas Gerais.
Abstract: Honey that is a natural product, produced by bees, can be considered the most complex food found in nature. This complexity in its composition is dependent on the climate, soil, type of bee and mainly the floral type in which the nectars are collected. Its physicochemical characteristics are important parameters to define, quantify and characterize its quality. Thus, the parameters of moisture, sucrose, glucose, fructose, acidity, diastase activity, hydroxymethylfurfural (HMF), ashes and insoluble solids constitute the quality and identity of honey. The objective of this work was to determine the physical-chemical, rheological and sensorial characteristics of honeys marketed in 6 mesoregions of Minas Gerais. However, it is possible to verify if there are possible adulterations, influence of the flowering and regions on the physical-chemical and rheological parameters and the influence of flowering on the sensorial acceptance. The use of statistical analyzes such as Principal Component Analysis (PCA) and Grouping were applied to physicochemical results in order to differentiate the honeys. The Prediction Map and CATA (check-all-that-apply) analyzes were used in the sensory evaluation. The results showed that the moisture content of honey varied between 14.26 and 18.42 g / 100g. The free acidity ranged from 14.16 to 34.87 meq / kg. The electrical conductivity ranged from 0.285 to 0.911 mS.cm-1. The ash content varied between 0.18 and 0.53%. The insoluble solids contents were below 0.1 g / 100g. The amount of HMF was below 60mg / kg. Diastolic activity with the exception of Eucalyptus samples from the Zona da Mata and Laranjeira of the South region showed values within Brazilian legislation (minimum 8). The pH ranged from 3.86 to 4.52 and the Brix was between 79.40 to 83.43. The samples showed higher fructose contents (35.86 - 41.50 g / 100g) and lower glucose contents (26,30 - 34,48 g / 100g). The sucrose contents, except for the Assa-Peixe sample from the Central region, showed values within the limits allowed by Brazilian legislation (6.0 g / 100 g). The fructose / glucose ratio ranged from 1.10 to 1.36. The plastic viscosity values ranged from 18.92 to 64.39 Pa.s-1. All honey samples showed behavior close to Newtonian and with low pseudoplasticity. The mathematical model of Ostwald de Waele provided a good description of the plastic viscosity of the honey. The use of analyzes of the main components between mesoregions and flowering showed that the physicochemical parameters viscosity, sucrose, pH and ashes can differentiate honeys from Triângulo Mineiro (TM) and Vale do Jequitinhonha and Mucuri (VJM) mesoregions. The results of the sensorial analysis indicated that there was a preference for the Velame and Silvestre flowering in the flavor attribute. Eucalyptus, Assa-Peixe and Velame in the texture attribute. Silvestre, Quince and Velame in the aroma attribute. Florada Assa-Fish by attribute appearance and Silvestre by attribute coloration. Flowering Eucalyptus and Silvestre were the ones that had the highest preference in the overall impression attribute, being these two flowering, the most commercialized in Minas Gerais.
Keywords: Mel
Mesorregião
Comportamento reológico
Honey
Mesoregions
Rheological behavior
CNPq: CNPQ::CIENCIAS AGRARIAS::CIENCIA E TECNOLOGIA DE ALIMENTOS
Language: por
Country: Brasil
Publisher: IF Sudeste MG - Campus Rio Pomba
Institution Initials: IF - Rio Pomba
Department: -
Program: -
Access Type: Acesso Embargado
URI: https://repositorio.ufjf.br/jspui/handle/ufjf/7126
Issue Date: 29-Nov-2016
Appears in Collections:PROQUALI - Dissertações



Items in DSpace are protected by Creative Commons licenses, with all rights reserved, unless otherwise indicated.