Projeto de uma matriz de sensores APS usando o PDK Sky130 e ferramentas Open Source
Loading...
Date
Authors
Journal Title
Journal ISSN
Volume Title
Publisher
Universidade Federal de Juiz de Fora (UFJF)
DOI
Abstract
This work presents the design, layout implementation, and post-layout characterization of a reduced image sensor array with 3T-APS topology, developed using a completely open-source tools with the open Sky130 PDK. The adopted methodology encompassed the theoretical study and modeling of the 3T pixel, followed by a comparative analysis of linearity and signal swing of different arrangements with the transistors available in the process. Based on this study, the most promising configurations were selected for the layout implementation of a 2x2 matrix, integrated with an analog multiplexer and the bias circuit. The fill factor obtained for the pixels implemented in the layout is greater than 65%. Physical verifications (DRC and LVS) and post-layout simulations confirmed the design integrity, demonstrating the correct operation of the addressing logic and the reset and integration cycles. It is concluded that the open-source tools is robust and viable for the design of CMOS image sensors, constituting a solid foundation for the future fabrication and experimental characterization of the device.
Description
Citation
Endorsement
Review
Supplemented By
Referenced By
Creative Commons license
Except where otherwise noted, this item's license is described as Acesso Aberto

