Avaliação da radiopacidade de diferentes sistemas cerâmicos livres de metal
Loading...
Date
Journal Title
Journal ISSN
Volume Title
Publisher
Universidade Federal de Juiz de Fora
DOI
Abstract
The aim of this study to evaluate the radiopacity of metal-free ceramic restorations in
an objective, subjective and by SEM and EDS. Ceramics were used: Noritake EX-3
(Noritake), VM13 (Vita), IPS Empress II (Ivoclar Vivadent), IPS e.max ZirPress
(Ivoclar Vivadent) and PM9 (Vita). For the objective evaluation were prepared five
specimens with thickness of 1, 2, 3 and 4 mm, which were radiographed with a
aluminum step and a dental section, using direct digital system. The radiographic
images were submitted to the reading of optical density. For subjective evaluation
were fabricated phantoms, simulating the back of the dental arches, in which two
teeth of each phantom received an inlay preparation, were restored with the studied
ceramics, and were x-rayed by the interproximal technique. These radiographs were
evaluated by three groups of examiners, dentists, radiologists, and prosthetists. To
analyze the chemical elements that provide radiopacity characteristics of the
materials, evaluation was performed by SEM and EDS. The results of objective
evaluation indicated significant differences between the radiopacity of the studied
ceramics. For 1 and 2 mm in thickness and the ceramics were all higher radiopacity
dentin and enamel below. Ceramics Noritake EX3 showed higher radiopacity in all
thicknesses. There was evident on the evaluations simulating clinical conditions, the
differences observed in the radiopacity of objective evaluation. The group of dentists
had a lower diagnostic accuracy when compared to groups of specialists, and
radiologists had the highest diagnostic accuracy for ceramics (0.57). Independent
group of evaluators was not possible to distinguish between X-ray and metal-free
ceramic composites. The result of evaluation of materials by SEM and EDS indicated
as possible elements radiopacifiers barium to ceramic Noritake EX-3 (2.19%), VM13
(1.04%), PM9 (0.70%) and IPS Empress II (0.70%) and zinc (4.50%) and cerium
(1.45%) for the ceramic IPS E.max ZirPress.
Description
Citation
Collections
Endorsement
Review
Supplemented By
Referenced By
Rights and licensing
Acesso Aberto
