Avaliação da radiopacidade de diferentes sistemas cerâmicos livres de metal

Loading...
Thumbnail Image

Journal Title

Journal ISSN

Volume Title

Publisher

Universidade Federal de Juiz de Fora

DOI

Abstract

The aim of this study to evaluate the radiopacity of metal-free ceramic restorations in an objective, subjective and by SEM and EDS. Ceramics were used: Noritake EX-3 (Noritake), VM13 (Vita), IPS Empress II (Ivoclar Vivadent), IPS e.max ZirPress (Ivoclar Vivadent) and PM9 (Vita). For the objective evaluation were prepared five specimens with thickness of 1, 2, 3 and 4 mm, which were radiographed with a aluminum step and a dental section, using direct digital system. The radiographic images were submitted to the reading of optical density. For subjective evaluation were fabricated phantoms, simulating the back of the dental arches, in which two teeth of each phantom received an inlay preparation, were restored with the studied ceramics, and were x-rayed by the interproximal technique. These radiographs were evaluated by three groups of examiners, dentists, radiologists, and prosthetists. To analyze the chemical elements that provide radiopacity characteristics of the materials, evaluation was performed by SEM and EDS. The results of objective evaluation indicated significant differences between the radiopacity of the studied ceramics. For 1 and 2 mm in thickness and the ceramics were all higher radiopacity dentin and enamel below. Ceramics Noritake EX3 showed higher radiopacity in all thicknesses. There was evident on the evaluations simulating clinical conditions, the differences observed in the radiopacity of objective evaluation. The group of dentists had a lower diagnostic accuracy when compared to groups of specialists, and radiologists had the highest diagnostic accuracy for ceramics (0.57). Independent group of evaluators was not possible to distinguish between X-ray and metal-free ceramic composites. The result of evaluation of materials by SEM and EDS indicated as possible elements radiopacifiers barium to ceramic Noritake EX-3 (2.19%), VM13 (1.04%), PM9 (0.70%) and IPS Empress II (0.70%) and zinc (4.50%) and cerium (1.45%) for the ceramic IPS E.max ZirPress.

Description

Citation

Endorsement

Review

Supplemented By

Referenced By

Rights and licensing

Acesso Aberto