Controle desacoplado entre um sistema de transmissão VSC-HVDC e as turbinas de um parque eólico offshore em conexão CC série
Loading...
Date
Authors
Journal Title
Journal ISSN
Volume Title
Publisher
Universidade Federal de Juiz de Fora (UFJF)
DOI
Abstract
This dissertation presents a decoupled control strategy between a VSC-HVDC transmission
system and the turbines of an offshore wind farm with generating units connected in
series by the DC terminals of its converters. In this strategy, the control of the generating
units is done independently of the inverter control of the onshore substation, used in the
VSC-HVDC transmission. This strategy also has other advantages compared to other
strategies proposed in the literature. In the configuration with generating units in DC series
connection, unlike other configurations proposed in the literature, an offshore substation
to increase the voltage to the transmission levels is not required. Despite the previous
advantage, this type of system is not explored in the literature and it has not yet been used
in any commercial project. Each generating unit comprises a wind turbine, a permanent
magnet synchronous generator, and a neutral point diode clamped (NPC) voltage source
converter, which control the currents delivered by the generators, thus regulating the
power supplied to the transmission system. In addition, a third harmonic equalization
and suppression strategy is used for capacitor voltages of NPC converters. In order to
ensure safe operation, a voltage controller is used so that the DC voltages of the NPC
converters do not exceed the maximum value. On the other side of the transmission system,
the mains connection is made by a modular multilevel converter (MMC). This converter
processes all the energy transmitted by the DC cables by controlling the current in the
DC terminals through the control of the currents injected in the AC network. In addition,
a circulating currents suppression strategy is used in the MMC. A voltage controller is
also used in the MMC, but to ensure that the DC voltage does not exceed the minimum
value. Simulations results obtained with the PSCAD/EMTDC program are used to verify
the operation of the proposed control strategy for different operation conditions.
Description
Keywords
Parques eólicos offshore , Sistemas de conversão de energia eólica , Conexão CC série , Conversor multinível modular , Conversor com neutro grampeado a diodos , Offshore wind farms , Wind energy conversion systems , Series DC connection , Modular multilevel converter , Neutral point diode clamped converter
Citation
Endorsement
Review
Supplemented By
Referenced By
Rights and licensing
Acesso Aberto
