Estabilidade de cor e comportamento mecânico de restaurações de resina composta do tipo Bulk-Fill
Loading...
Date
Authors
Journal Title
Journal ISSN
Volume Title
Publisher
Universidade Federal de Juiz de Fora - Campus Avançado de Governador Valadares
DOI
Abstract
Resin composites possess greater and greater applicability in restorative dentistry
especially due to their ability in mimicking the optical characteristics of dental
substrates, and not less important, due to their satisfactory mechanical
performance. However, novel resin composites have launched, needing
characterization and clinical evaluation. Hence, the purpose of this study was to
investigate the color stability and mechanical behavior of new generation, bulk-fill
resin composites. Twenty-eight samples were obtained from bovine incisors, which
were prepared to cavities with 4 mm-width and 5 mm-thickness. Each sample was
randomly separated into four groups (n=7) according to the restorative technique:
Controle negativo – none material was applied; Controle positivo – conventional
resin composite (Opallis; FGM) was applied using increments of up to 2 mm-thick;
Bulk Fill – bulk-fill resin composite with regular viscosity (Opus Bulk Fill; FGM) was
applied using only one increment of 5 mm-thick; and Combinada – bulk-fill resin
composite with low viscosity (Opus Bulk Fill Flow; FGM) and Opallis were applied
in sequence. Color of the restorations was measured using a digital
spectrophotometer (Vita Easyshade; Vita Zahnfabrik) and CIEL * a * b * system. The
samples were immersed in distilled water, at 37oC, for 30 days; next, they were once
again color-measured. All samples were submitted to a mechanical testing machine
(DL500; EMIC) for compressive strength evaluation. Young’s modulus and work of
fracture were obtained from the stress-strain curves obtained through the
mechanical test. All data were analyzed using Analysis of Variance and Tukey
(α=5%). The Controle positivo resulted in greater color alteration than the other
restorative techniques (p<0,001). All restored groups were stronger than the
Controle negativo (p≤0,006). The different restorative techniques resulted in similar
Young’s modulus and work of fracture (p≥0,242), except for the Bulk Fill technique,
which demonstrated greater compressive strength as compared to the Controle
positivo (p=0,05). Overall, the failure mode of the restorations was similar regardless
of the group tested. In conclusion, bulk-fill resin composites and their respective
restorative technique evaluated in this study are adequate, showing similar
mechanical performance to the control technique (incremental technique), as well
as greater color stability after a short period of water storage.
Description
Keywords
Técnica restauradora com resina composta , Resina de preenchimento único , Resina bulk-fill , CIEL * a * b * , Resistência à compressão , Módulo de elasticidade , Trabalho de fratura , Restorative technique with resin composite , Bulk-filling resin , Bulk-fill resin composite , Compressive strength , Young’s modulus , Work of fracture
Citation
Collections
Endorsement
Review
Supplemented By
Referenced By
Rights and licensing
Acesso Aberto
