Análise longitudinal do efeito de soluções desinfetantes sobre a rugosidade de superfície e estabilidade de cor de materiais reembasadores
Loading...
Date
Authors
Journal Title
Journal ISSN
Volume Title
Publisher
Universidade Federal de Juiz de Fora - Campus Avançado de Governador Valadares
DOI
Abstract
This in vitro study evaluated the effects caused by disinfectant solutions on the
color stability and roughness of resilient reliners at different time periods. For such
study, 60 circular specimens (3x15mm) were prepared for each material used,
TDV and Soft Confort, which were randomly distributed in 4 groups/reliner (n=15):
AC: Undiluted acetic acid (vinegar); SH0.25% / SH0.5% / SH1%: Sodium
hypochlorite at 0.25%, 0.5% and 1%, respectively. The disinfection protocol
considered 20 minutes of immersion in the disinfectant solutions. For the readings
of the response variables, the surface roughness was measured by a rugosimeter
and the color change by a spectrophotometer. The periods of analysis were after
7, 14, 21, 30, 60, 90, 180 and 270 days of immersion. Data processing was
realized by the Anova (Three-way) and Tukey Test, since the data distribution was
normal (Shapiro-Wilks Test). For the specimens of both materials, SH0.5% (1.34 ±
0.40) caused the greatest changes in surface roughness, while vinegar (1.2 ±
0.40) and SH0.25% (1.24 ± 0.46), the lowest, with equivalence between them, and
SH1% (1.34 ± 0.40) was intermediate between the other solutions. There was a
difference between the times only for the group of SH0.5%, which caused changes
only with 21 days of immersion, reaching the highest values, which was equal to
the final time of 270 days. As for the color change, there was a significant
difference between the materials (p = 0.000), in which the Soft Confort resilient
reliner (4.20 ± 2.90; NBS System: significant) obtained the best results compared
to TDV (6.40 ± 3.10; NBS system: large). The specimens of the two resilient
reliners obtained greater color change after immersion in SH0.5% and lower in
vinegar. Intermediates between SH0.25% and SH1% which obtained values
different from each other, but were equal, according to the NBS classification,
including with vinegar. In conclusion, the most suitable disinfectant solution to
control color change is vinegar and surface roughness of the resilient reliners
analyzed is 0.25% sodium hypochlorite.
Description
Citation
Collections
Endorsement
Review
Supplemented By
Referenced By
Rights and licensing
Acesso Aberto
