Modelagem e projeto de um conversor ressonante LLC para o acionamento de LEDs utilizando uma metodologia de elevada acurácia
Loading...
Date
Authors
Journal Title
Journal ISSN
Volume Title
Publisher
Universidade Federal de Juiz de Fora (UFJF)
DOI
Abstract
This work presents a high accuracy methodology for designing LLC resonant converter
applied to LED driving. This technique has been considered for analyzing and designing
a dc-dc LLC resonant converter used as a second stage in an o -line LED driver.
The proposed accurate mathematical modeling (MMA) has been used to adjust the
switching frequency of the resonant converter in order to compensate the errors caused
by the First Harmonic Approximation (FHA) design approach. The proposed methodology
is based on the mathematical analysis of the converter together with numerical
algorithms to solve a set of equations that describe the driver behavior. In addition, an
investigation regarding which design parameters in
uence the LED low-frequency (LF)
current ripple has been carried out. Based on this analysis, a novel design methodology
that allows for the attenuation of the LF current ripple has been devised. The proposed
model has been employed to determine the low-frequency current ripple transmission
on the LLC resonant converter and to properly design the bus capacitance of the LED
driver, which also has a rst stage based on the boost power factor pre-regulator. In
order to perform the control of the converter, the small-signal modeling of the studied
topology was developed. The proposed model was based on existing methodologies presented
in the literature and also on the contributions of the accurate modeling, seeking
a reliable description of the dynamic behavior of the converter. The validation of the
accurate mathematical model, the proposed design methodology and the designed control
system was carried out by means of computational simulations and experimental
implementations in a 46-W prototype fed from a 127-V ac grid.
Description
Keywords
Conversor LLC ressonante , Modelagem matemática acurada , Diodos emissores de luz (LED) , Transmissão da ondulação de baixa frequência , Conversor de dois estágios , Modelagem de pequenos sinais , Sistema em malha fechada , LLC resonant converter , Accurate mathematical modeling , Light emitting diode (LED) , Current ripple transmission , Two-stage off-line LED driver , Small-signal modeling , Closed-loop system
Citation
Endorsement
Review
Supplemented By
Referenced By
Rights and licensing
Acesso Aberto
