In-home and low-voltage channel characterization of non-cooperative and cooperative power line communication

Loading...
Thumbnail Image

Journal Title

Journal ISSN

Volume Title

Publisher

Universidade Federal de Juiz de Fora

DOI

Abstract

This thesis outlines a statistical characterization of the Brazilian In-Home Low-Voltage Electric Power Grid as a communication medium. The discussions are based on estimated channels obtained in a measurement campaign carried out in four different apartments with sizes ranging from 50 up to 90 square meters. The parameters considered for this analysis are the Root Mean Square Delay Spread, the average channel gain, and the channel capacity. For the sake of comparison with the Electric Power Grid in United States, the frequency band ranging from 1:705 up to 30 MHz was set. The reported analysis shows that the Root Mean Square Delay Spread and the average channel gain cannot be modeled as log-normal variables, this cast doubt the current results found in the literature, in which is stated that both the Root Mean Square Delay Spread and the average channel gain follow a log-normal distribution. This was followed by the Power Line Communication access impedance and noise measurements in the In-Home Low-Voltage Electric Power Grid. Additionally, the suitability of cooperation concepts for improving the performance of Power Line Communication systems was analyzed, more specifically in the Brazilian In-Home Low-Voltage Electric Power Grid. For this purpose, the performance of the Amplify-and-Forward and Decode-and- Forward protocols, together with the Equal-Gain Combining, Selection Combining, and Maximal-Ratio Combining techniques were analyzed. The analysis was carried out on the measured data covering a frequency band from 1:705 up to 100 MHz. The measured data addresses four scenarios for possible relay node locations. The attained results show that the Amplify-and-Forward is of limited applicability in the Power Line Communication context and the opposite is valid to the Decode-and-Forward protocol, mainly if the error probability of detecting symbols at the relay node is zero.

Description

Citation

Endorsement

Review

Supplemented By

Referenced By

Rights and licensing

Acesso Aberto