A prototype of a narrowband hybrid PLC/Wireless transceiver
Loading...
Date
Journal Title
Journal ISSN
Volume Title
Publisher
Universidade Federal de Juiz de Fora (UFJF)
DOI
Abstract
This thesis focuses on a prototype of the so-called narrowband (NB) hybrid power line
communication (PLC)/Wireless transceiver, which jointly uses power line and wireless
channels, in parallel, for data communication related to smart grid (SG) and Internet
of Things (IoT) applications. To build the prototype, it is introduced an enhanced
and adapted version of the IEEE 1901.2 Standard to implement the medium access control
(MAC) sublayer and the physical (PHY) layer to transmit data through both channels.
The enhancement is based on the use of the Hilbert transform to recover the quadrature
information from both channels, enabling to estimate the frequency deviation between
the transmitter and receiver’s clocks. One adaptation in the IEEE 1901.2 Standard is
the introduction of a routing protocol, which enables the transceivers to communication
with nodes two hops or farther from each other. The other adaptation is the implementation
of a packet error correction technique at the link layer level, which combines packets
with errors received from PLC and wireless media and correct them, under certain constraint.
Moreover, relevant is the fact that the NB hybrid PLC/Wireless transceiver is
compatible with the NB PLC transceiver based on the IEEE 1901.2 Standard. The NB
hybrid PLC/Wireless transceiver prototype is implemented in a field-programmable gate
array (FPGA) device and details about the implementation, using a hardware description
language (HDL), are provided, highlighting the pursuit of hardware resource savings. Numeric
results discuss the time analysis of the packet error correction technique, calculating
its maximum capacity of correction taking into account the IEEE 1901.2 Standard time
constraints. Furthermore, a PHY layer data-rate analysis shows that the implementation
agree with the IEEE 1901.2 Standard and can perfectly satisfy the needs of SG and IoT
applications. In addition, the hardware resource usage and power consumption analysis
show that the NB hybrid PLC/Wireless transceiver prototype demands less than one
and a half times the hardware resource usage and power consumption of the NB PLC
transceiver prototype.
Description
Citation
Endorsement
Review
Supplemented By
Referenced By
Rights and licensing
Acesso Aberto
