Reconstrução de energia para calorímetros finamente segmentados
Loading...
Date
Authors
Journal Title
Journal ISSN
Volume Title
Publisher
Universidade Federal de Juiz de Fora
DOI
Abstract
This thesis presents data processing techniques of signal detection and energy
estimation for high energy calorimetry. Modern calorimeters have thousands of
readout channels and operate at high event rate conditions. Typically, the energy
reconstruction involves both detection and estimation tasks, and it is based on the
amplitude estimation of the received digitized signal. The current methods employed
by high energy experiments are based on variance minimization techniques, and the
valid signals are selected based on the energy estimation. This work explores the
use of a technique based on Matched Filter for signal detection, and it makes use of
a calibration factor to estimate the energy. In the proposed approach, the stochastic
parameters of the pulse (phase and deformation) and the statistics from the
background are considered for the filter design in order to increase performance. In
particular cases, where the signal pile-up is likely to occur, another promising technique,
based on linear signal deconvolution is discussed. The techniques proposed
in this thesis were implemented offline and applied on the ATLAS Tile Calorimeter
(TileCal) at LHC. Both simulated signals and real data acquired during nominal
LHC operation were used. The proposed estimators presented smaller error with
respect to the methods currently used in modern calorimeter systems, and they have
been extensively tested to be used in TileCal.
Description
Citation
Collections
Endorsement
Review
Supplemented By
Referenced By
Rights and licensing
Acesso Aberto
