Material and geometry effects of dielectric and conductive resonators on rectangular patch antennas
Loading...
Date
Journal Title
Journal ISSN
Volume Title
Publisher
Universidade Federal de Juiz de Fora (UFJF)
DOI
Abstract
The growing demand for compact, lightweight, and high-performance antenna systems
has been driven by applications such as the Internet of Things (IoT), wearable electronics,
wireless sensor networks, and 5G/6G communication systems. Among the available radiating structures, microstrip patch antennas are widely employed due to their low profile
and ease of fabrication; however, their resonant frequency is intrinsically tied to physical
dimensions, imposing significant challenges to further miniaturization. In this context,
alternative materials and electromagnetic loading techniques based on dielectric and conductive resonators become essential to overcome this limitation without a proportional
increase in antenna size. This dissertation numerically investigates the integration of dielectric and conductive resonators into rectangular patch antennas. As a complementary
contribution, an unloaded rectangular patch antenna is separately designed, fabricated,
and experimentally characterized to validate the electromagnetic models employed. First,
a comprehensive comparative study is presented, evaluating fifteen resonator geometries
filled with distilled water (DW), glycerin, and graphite under the same reference antenna,
substrate, and simulation conditions, showing that antenna performance depends on the
combined influence of resonator material and geometry rather than on either factor alone.
Based on the insights gained, a dedicated half-torus resonator is subsequently investigated
as a loading element for antenna miniaturization, addressing resonant-frequency reduction
while preserving the antenna’s original physical footprint. Finally, as a complementary
study, a rectangular patch antenna without resonator loading is designed, fabricated, and
experimentally characterized on a distinct substrate, allowing the agreement between simulated and measured results to be assessed and the influence of substrate characterization
on the accuracy of the employed electromagnetic models to be investigated. The obtained
results indicate that suitable combinations of resonator material and geometry provide
an effective means of enhancing patch antenna performance and enabling miniaturization,
while the experimental characterization of the unloaded antenna highlights the importance of accurate substrate modeling for improving agreement between simulation and
measurement.
Description
Keywords
Citation
Collections
Endorsement
Review
Supplemented By
Referenced By
Creative Commons license
Except where otherwise noted, this item's license is described as Acesso Embargado

