Avaliação de novas texturas para otimização da resistência ao cisalhamento de interface em geomembranas
Loading...
Date
Authors
Journal Title
Journal ISSN
Volume Title
Publisher
Universidade Federal de Juiz de Fora (UFJF)
Abstract
Geosynthetics are extremely versatile materials and they are applicable in civil
engineering, with geomembranes, one of the most used types, considering, especially, its use
in geoenvironmental engineering works. The main function of geomembranes is to act as a
barrier against the flow of gases and liquids, being applicable in projects like water and waste
containment ponds, landfills, dams, and other earthworks. However, the interface between the
geomembrane and the soil is a critical factor that must be analyzed, because this interaction can
be susceptible to localized safety problems and even the total collapse of the structure. In this
work, different types of geomembranes in contact with a sand will be analyzed, and the analysis
criterion used will be the interface shear strength, an important factor for verifying the safety
of geotechnical structure that include geosynthetics. The texture and roughness of
geomembrane are essential factors for the interface shear resistance, because the mechanical
adhesion and interlocking mobilized in the contact zone increase adhesion and friction angle,
which are fundamental factors for the increase of this resistance. The present work aims to
analyze different types of geomembranes in interaction with a sand and to propose new textures
of geomembranes, suitable to ensure an improvement in the interface shear strength parameters.
To achieve this work, direct shear tests will be conducted on four existing types of
geomembranes: one smooth and three textured. In addition, characterization of geomembranes
will be carried out using scanning electron microscopy, using the enlargement of the
geomembrane images, with the aim to evaluate the surface of the materials. With the results of
these analyses, new models of geomembrane will be proposed, which will be modeled in digital
files and printed using 3D printers. It is concluded that the printed geomembranes exhibited
peak shear strength values very similar to those of commercial geomembranes. However, they
showed superior residual shear strength performance, especially under lower normal stresses,
demonstrating a potential for the use of these new geomembranes, especially the GI12, mainly
for covering sanitary landfills and waterproofing channels.
Description
Citation
Collections
Endorsement
Review
Supplemented By
Referenced By
Creative Commons license
Except where otherwise noted, this item's license is described as Acesso Aberto

