Impacto de danos nas ponteiras do LED fotopolimerizador à microdureza de superfície de resinas compostas nanoparticuladas convencional e Bulk Fill

Loading...
Thumbnail Image

Journal Title

Journal ISSN

Volume Title

Publisher

Universidade Federal de Juiz de Fora (UFJF)

Abstract

This study evaluated the impact of different levels of damage to LED curing light tips on the Knoop microhardness (KHN) of nanoparticulate composite resins, Filtek Z350 XT and Filtek One Bulk Fill. Four tips, collected from the UFJF Dental Clinic, were used and classified according to their level of surface integrity, considering the presence of physical damage, fractures, and adhered debris. They were attached to the same base of the LED curing light (Optilight, Gnatus) and received the categories: intact, slightly damaged, damaged, and severely damaged, allowing for the isolated analysis of the effect of tip integrity on irradiance and photopolymerization. Standardized cylindrical samples were prepared and evaluated for microhardness on the top and base surfaces before and after thermocycling. The results demonstrated a progressive and significant reduction in the power and irradiance emitted as the damage to the tips increased. Microhardness was also negatively affected, especially in the Z350 XT resin, which showed a significant decrease in KHN when light-activated by damaged tips. The Filtek One Bulk Fill resin exhibited lower absolute KHN values, but greater stability in the base/top ratio, maintaining a ratio ≥0.80 in most groups, even after thermocycling. Z350 XT showed higher absolute microhardness, but greater variability in response to tip damage and thermal aging. Thermocycling did not promote significant changes in most groups, although it contributed to stabilizing the base/top ratio in some of them. It is concluded that the integrity of the light-curing unit tip is crucial for adequate light transmission and the mechanical performance of composite resins. Damaged tips reduce irradiance and compromise microhardness, potentially affecting the quality and longevity of restorations. Periodic maintenance and inspection of tips should be considered essential steps in clinical practice.

Description

Citation

Endorsement

Review

Supplemented By

Referenced By

Creative Commons license

Except where otherwise noted, this item's license is described as Acesso Aberto