Sorção de água e solubilidade de cimentos resinosos autoadesivos: análise comparativa após ciclagem térmica
Loading...
Date
Authors
Journal Title
Journal ISSN
Volume Title
Publisher
Universidade Federal de Juiz de Fora (UFJF)
DOI
Abstract
The aim of this study was to compare water sorption and solubility among different
self-adhesive resin cements subjected to different periods of thermocycling.
Standardized cylindrical specimens (6 mm × 2 mm) were prepared using a silicone
mold for each resin cement group (n = 7 per group): RelyX U200, Panavia SA Luting,
seT PP, and RelyX Universal. All cements were handled and dispensed into the mold
placed on a glass plate using their self-mixing system. Before polymerization, the
inserted cement was covered with a polyester strip, followed by a glass slide, which
was pressed manually for 60 s and kept under a 500 g weight for 60 s. After the
chemical reaction, light curing with an LED (~1200 mW/cm²) was performed for 60 s.
The specimens were stored in a desiccator and weighed daily on an analytical balance
until mass 1 stabilized, after which they were subjected to 2,500 and 5,000 thermal
cycles in water, alternating between 5ºC and 55ºC. At the end of each period,
specimens were weighed to record mass 2 and returned to the desiccator until mass
3 stabilized. Water sorption and solubility values (µg/mm³) were calculated and
analyzed using ANOVA followed by Tukey’s test (α = 0.05). The seT PP cement
showed the highest water sorption in both thermocycling periods and the highest
solubility (p < 0.001). RelyX U200 showed a negative mean solubility, significantly
lower than Panavia SA Luting (p = 0.033) and RelyX Universal (p = 0.015), which
showed intermediate performance and were similar to each other (p > 0.05). Increasing
the number of thermal cycles from 2,500 to 5,000 did not result in statistically significant
differences in sorption or solubility in any group. It was concluded that cements with
higher hydrophilic monomer content, such as seT PP, exhibit greater water sorption
and solubility after thermocycling, indicating lower chemical stability.
Description
Keywords
Citation
Collections
Endorsement
Review
Supplemented By
Referenced By
Creative Commons license
Except where otherwise noted, this item's license is described as Acesso Embargado

