Síntese e caracterização de material de carbono sp2 sem uso de catalisador
Loading...
Date
Authors
Journal Title
Journal ISSN
Volume Title
Publisher
Universidade Federal de Juiz de Fora (UFJF)
DOI
Abstract
This work aims to study graphene synthesis via Chemical Vapor Deposition (CVD)
without the use of metallic catalysts. We grew films directly on SiO₂/Si substrates.
We demonstrated that catalyst-free graphene growth is not self-limiting; in other
words, the film thickness strongly depends on the growth time. We investigated
synthesis durations of 3 hours, 2 hours, 1 hour, and 30 minutes, and observed
significant differences in film thicknesses and surface coverage. No carbon-based
material growth was observed at 30 minutes, and films grown for longer periods
tended to be less crystalline compared to those grown for shorter times. In order to
obtain more crystalline films with full substrate coverage, we developed a method we
named “pulsed gas flow.” This method is innovative, as we are unaware of similar
approaches reported in the literature. The pulsed gas flow technique involves growth
with curing intervals during deposition, in which the introduction of the carbon
precursor gas (CH₄) is periodically interrupted. This approach is intended to promote
greater ordering of carbon-carbon bonds, enabling the formation of crystalline films
without the presence of disordered carbon atoms. We performed 3-hour syntheses
using pulsed flow and tested three different curing times: 1 minute, 3 minutes, and 5
minutes. For the shortest curing time, the resulting films were similar to those grown
under continuous flow, while for the longest curing time, no carbon material growth
was observed. The characterization of our films was carried out using scanning
electron microscopy (SEM), Raman spectroscopy, and electrical characterization via
the Hall effect. The synthesized material was found to be p-type doped, in agreement
with previous reports in the literature. To demonstrate the practical relevance of this
type of synthesis, we fabricated a field-effect transistor (FET) using samples grown
under both continuous and pulsed gas flows. We swept the gate voltage from
(−30.0±0.1) V to (30.0±0.1) V and observed a shift in the Fermi level, along with an
increase in current and conductivity of the synthesized material.
Description
Keywords
Grafeno , Material 2D , CVD , Gás pulsado , Transistor , Graphene , 2D material , Pulsed gas flow , Transistor
Citation
Collections
Endorsement
Review
Supplemented By
Referenced By
Creative Commons license
Except where otherwise noted, this item's license is described as Acesso Aberto

