CONCALC - Dosagem de concreto de cimento portland
Loading...
Date
Journal Title
Journal ISSN
Volume Title
Publisher
Universidade Federal de Juiz de Fora (UFJF)
DOI
Abstract
The dosage of Portland cement concrete involves experimentally determining the quantities of
each input necessary for preparing the concrete, which includes Portland cement, fine
aggregates, coarse aggregates, water, additives, and supplementary materials. CONCALC was
developed to streamline and facilitate the dosage of Portland cement concrete, aiming for
material efficiency, quality, safety, and speed. CONCALC was created with consideration of
the requirements and criteria specified in the technical standards of ABNT, namely: (NBR
7212, 2021), (NBR 12655, 2022), (NBR 5738, 2016), (NBR 5739, 2018), (NBR 6118, 2023).
Its use requires prior knowledge of material characteristics such as specific gravity and grain
size, as well as an understanding of material "packing" and concrete workability. CONCALC
was developed using Microsoft Excel and is characterized by its intuitive and user-friendly
interface. To verify the effectiveness of CONCALC, this work includes a practical example of
its use, along with a real demonstration of the results obtained. CONCALC was used to dose
the concrete for the pillars of a building in the urban area of Juiz de Fora, MG, CAA II. The
dosed concrete was C25, for which three mixes (lean, basic, and rich) were calculated, yielding
strengths at 28 days of 27.9 MPa, 33.85 MPa, and 35.85 MPa, respectively. This concrete will
be used for the repair and reinforcement of concrete pillars that have degraded over time, and
CONCALC proved effective in calculating the concrete mix for this purpose. CONCALC can
be requested via email at pedrohenriqueoc@hotmail.com.
Description
Citation
Collections
Endorsement
Review
Supplemented By
Referenced By
Creative Commons license
Except where otherwise noted, this item's license is described as Acesso Aberto

