Iluminação natural no poço de luz: investigando a influência das variáveis arquitetônicas por meio da simulação computacional paramétrica
Loading...
Date
Authors
Journal Title
Journal ISSN
Volume Title
Publisher
Universidade Federal de Juiz de Fora (UFJF)
DOI
Abstract
The light well is an architectural resource used to promote daylighting from the
core of the building. It is often designed according to an index that considers its size
according to the height of the building without taking into account the influence of each
of the architectural variables on the gains in daylighting. Thus, the main objective of
this study is to identify and compare the influence of architectural variables on the
natural lighting performance of a light well in a residential building. To this end, a base
model of a light well in the city of São Paulo, Brazil, was parametrically simulated,
varying, in alternative cases, its geometric size, the reflectance of its walls and the
window opening of the rooms connected to it. To evaluate natural lighting, the metrics
Illuminance, Annual Sunlight Exposure (ASE1000) and Spatial Daylight Autonomy
(sDA300/50%) were used through the Climate Studio software. The study was
conducted in four stages: i) investigation of the path of light through the walls of the
well; ii) verification of the incidence of natural lighting in the internal environments of
the base model; iii) investigation of how the variation in the architectural configurations
of the well affects the lighting of the environments and iv) proposal of an optimized
model simulated from the best configurations found in the study. As a result, it was
found that this negatively affects the lighting in the internal environments, since those
at the top remain excessively illuminated, while those at the bottom do not receive
adequate natural light. It was also found that increasing reflectance is a solution that
improves the distribution of natural lighting without increasing the levels of direct
sunlight, while increasing the geometric dimension results in greater direct sunlight
reaching the well, not exceeding the fourth floor. To minimize the risk of visual
discomfort in the environments, the windows should have a smaller opening in the
upper half and a larger one in the lower half of the light well. The optimized model
considered the light well in two halves, one upper and one lower, allowing for smaller
openings at the top and larger ones at the bottom. In addition, a high-reflectance
surface was applied to the walls and a 7m upper opening. This model resulted in a
better distribution of lighting through the shaft. It is expected that the methods and
results of this work can contribute to the investigation of daylighting in buildings.
Description
Citation
Endorsement
Review
Supplemented By
Referenced By
Creative Commons license
Except where otherwise noted, this item's license is described as Acesso Aberto

