Análise da eficiência de fundações ramificadas
Loading...
Date
Authors
Journal Title
Journal ISSN
Volume Title
Publisher
Universidade Federal de Juiz de Fora (UFJF)
Abstract
Study of foundations in engineering is very relevant since these elements form the
basis of virtually any building. Piles are foundation elements that use, in many cases,
basically lateral friction as a mechanism for transferring loads, which depends on the
surface contact area between the structure and the soil. Branched natural systems have
large surface areas, such as tree’s roots, that use its branched geometry as an anchor system
to increase its ability to withstand requests, like self weight and wind loads. This research
presents a branched structure model based on fractal geometry, that may be used as an
alternative solution for foundations. The aim of this research is to compare the performance
of branched foundation models against standard stake ones. The performance of each
model will be discussed for its load capacity, stress levels and displacements. In addition to
that, analyse the efficiency related to increasing the number of branches in the structures,
the impact due the adoption of different branching angles and the efficiency related to
other branched model generation parameters. The model was simulated using PLAXIS, a
software capable of modeling the non-linear soil behavior and the interface between soil
and structure. The results of the simulations evidence that a branched structure compared
to a standard pile with same volume presents higher carrying capacity and lower maximum
displacements, showing that this structures are more efficient in both aspects. On the
other hand, the rate of increase of load capacity comparing different branched models
declines for structures with higher number of branches. The same behavior is observed for
the reduction of displacements analysis. Simulating structures with different branch angles
shows that, until a certain point, the higher the branching angles the higher the load
capacity, however, angles higher than 60◦
showed a decrease in its load capacity. In general
lines, the study suggests the concept of an optimum design model for a branched structure
in both parameters, number of branch orders and branch angle, proposing the existence
of an optimized structure, capable of increase the soil-foundation mechanical resistance
properties without using a very complex geometry. The efficiency of this structural systems
was also verified through a study with an adapted branched model that has no branch
angle (inspired by torpedo stakes), by using laboratory tests and computational analysis,
whose results corroborate the efficiency of using branched geometries in optimizing the
resistance of foundation systems. The studies showed that branched structures have a
good potential to be used as a solution for edification foundation systems.
Description
Citation
Collections
Endorsement
Review
Supplemented By
Referenced By
Creative Commons license
Except where otherwise noted, this item's license is described as Acesso Aberto

