Diodos emissores de luz integrados de alta corrente (EHC COB LEDs): caracterização e circuitos de acionamento
Loading...
Date
Authors
Journal Title
Journal ISSN
Volume Title
Publisher
Universidade Federal de Juiz de Fora (UFJF)
DOI
Abstract
This work is focused on the theoretical and experimental evaluation of extra-high current
(EHC) chip-on-board (COB) light emitting diodes (LEDs), which feature extra-high luminous
flux (up to 60 klm). The conception of high-frequency power electronic converters for this
extra-high current application is also proposed. This thesis aims to propose a specific
approach for EHC COB LEDs and, consequently, the investigation of two-stage drivers for
the accurate operation at extra-high current and high power levels. Initially, the study presents
a general introduction concerning the actual scenario and applications of solid-state lighting
(SSL) based on high power levels and high luminous flux. In this context, an extensive
literature technical review on the COB LED technology is carried out. An Improved
Photoelectrothermal (IPET) modeling, which considers some key thermal parameters
variations, i.e., the heat dissipation factor and the device junction resistance, is also evaluated
concerning an EHC COB LED specific model that significantly modifies and improves the
luminous flux prediction. The design methodologies are presented and applied to a 600-W
EHC COB LED luminaire, which presents a typical power level required in wide outdoor
environments such as sport stadiums and courts, airport highways, marine beacons, mining,
and specific industrial applications. Some particular drivers are then presented for EHC COB
LED applications, while the limitations of single-stage topologies as high energy reprocessing
and poor efficiency for high current levels are addressed and properly referenced. In order to
overcome such limitations, two-stage driving alternatives are proposed as reliable approaches
for EHC COB LEDs. Besides, topologies with power control capability based on the
interleaving technique are analyzed aiming at improved efficiency and controllability.
Experimental results show high power factor (0.99), reduced total current harmonic distortion
(in compliance with international power quality standards), high efficiency (over 90%), long
lifespan due to the use of only film capacitors, and good output current control with dimming
capability.
Description
Keywords
Circuitos de acionamento de LEDs , Iluminação de exteriores (floodlighting) , LEDs chip-on-board (COB) de extra-alta corrente (EHC) , Modelagem fotoeletrotérmica aprimorada (IPET) , High current LED drivers , Outdoor floodlighting , Extra-high current (EHC) chip-on-board (COB) LEDs , Improved photoelectrothermal (IPET) modeling
Citation
Collections
Endorsement
Review
Supplemented By
Referenced By
Creative Commons license
Except where otherwise noted, this item's license is described as Acesso Aberto

