Monitoramento do desempenho do processo de secagem por atomização e caracterização físico-química do leite desnatado na aplicação de um protocolo de encapsulamento baseado em modificações de pH
Loading...
Date
Authors
Journal Title
Journal ISSN
Volume Title
Publisher
Universidade Federal de Juiz de Fora (UFJF)
DOI
Abstract
Spray drying is a process widely applied in the dairy industry to produce powder
ingredients, mainly as powder milk and its derivates. In this document drying technology is
addressed in two different projects. For the first project, it is relevant to consider that in the
industrial scale the modern drying equipment presents two and three stages for the evaporation
process, nevertheless in the pilot scale it is common to dry using single-stage spray dryers. In
this project a characterization of the performance of a pilot scale single-stage spray dryer was
performed in terms of the experimental parameters. The studied parameters were mass and
energy balance, while the independent variables were inlet drying air temperature, inlet product
flow rate, and nozzle selection. The results suggest that the inlet product flow rate improves the
performance because it increases the nozzle pressure, which enhances the surface area of the
droplets for increasing the mass and energy transference in the drying process. The nozzle
selection can significantly affect the performance of the spray dryer, so it is important to
guarantee the non-utilization of pieces with defects. The effect of inlet air temperature was to
increase the lost energy in the process and did not improve the performance, suggesting that the
equipment needs to optimize energy utilization by isolating the drying chamber. For the second
project was addressed an encapsulation technology for fat-soluble vitamins which could be
applied in the production of fortified skimmed powder milk. The objective was to evaluate the
effect of the total solid concentration and characterize the physicochemical interactions in the
system through the application of the encapsulation protocol; the protocol was divided in three
treatments. The studied parameters were electrophoretic mobilities reported as surface zeta
potential, conductivity, particle size distribution, and soluble ionic calcium; while the
independent variables were total solid concentration and treatment applied. The main results
are that the protocol can be applied with a total solid concentration of 17 g.100 g-1
and reversibility of the expansion-contraction process of the casein micelle is inversely proportional
to the concentration of the product.
Description
Citation
Collections
Endorsement
Review
Supplemented By
Referenced By
Creative Commons license
Except where otherwise noted, this item's license is described as Acesso Aberto

