Alternatives for high performance LED driving in off-line applications
Loading...
Date
Authors
Journal Title
Journal ISSN
Volume Title
Publisher
Universidade Federal de Juiz de Fora (UFJF)
Abstract
This doctoral thesis proposal is focused on the area of high-performance off-line LED
drivers, in other words, converters that feature high efficiency, low cost, high reliability, high power density, and high power factor. The work presents alternatives for
achieving these desirable characteristics. In order to obtain topological alternatives
with high efficiency, this research uses resonant conversion in the second stage to reduce switching losses. In this sense, a high-accuracy methodology for designing a dc-dc
LLC resonant converter has been proposed, so that the operation point of the converter
and the low-frequency (LF) current ripple transmission can be defined with errors significantly lower than the ones obtained by other strategies, such as based on First
Harmonic Approximation (FHA). In order to reduce the total cost of the topology, the
work studies converters that integrate the power factor correction (PFC) stage with
the power control (PC) stage, thus reducing the number of components that yields simplicity and low cost. The work also addresses alternatives for increasing the reliability
and power density of LED drivers. These two characteristics are strongly linked to the
sizing of the capacitors used to filter the low-frequency ripple of the output current,
which are often large and directly related to the circuit reliability. In this regard, an
alternative for Active Ripple Compensation (ARC) techniques is proposed to reduce
the converter bulk capacitance. The proposed technique performs the compensation
by deliberate modulation of the converter’s switching frequency, which allows for a
huge capacitance reduction with a negligible increase in the THD of the input current. Experimental results gathered from a 96-W laboratory prototype supplied from
a 127-V 60-Hz grid attested to the superior performance of the frequency-based active
ripple compensation since a capacitance reduction of 66.6% has been obtained with
an increase of only 0.9% in the THD. In addition, a systematic design methodology
based on a constrained multi-objective optimization problem is proposed for designing
high-performance drivers. The proposed strategy enables the simultaneous design of
the power circuit elements and the controller with frequency-based ARC, while optimizing various performance parameters. Experimental results from the optimized
converter demonstrated the significant improvements in performance parameters, such
as a 38.25% reduction in failure rate and a 111.69% increase in power density of passives elements. The proposed converter also achieved an efficiency of 90.96%, meeting
the desirable characteristics for a high-performance driver.
Description
Keywords
Conversor ressonante LLC , Driver de LED alimentado a partir da rede elétrica , Modelagem matemática acurada , Compensação ativa da ondulação de baixa frequência. , LLC resonant converter , Off-line light-emitting diode (LED) drivers , Accurate mathematical modeling , Active ripple compensation , Capacitance reduction , Multi-objective optimization
Citation
Collections
Endorsement
Review
Supplemented By
Referenced By
Creative Commons license
Except where otherwise noted, this item's license is described as Acesso Aberto

