Efeito do uso de líquido modelador na estabilidade de cor e translucidez de resina composta
Loading...
Date
Authors
Journal Title
Journal ISSN
Volume Title
Publisher
Universidade Federal de Juiz de Fora - Campus Avançado de Governador Valadares
DOI
Abstract
One of the greatest challenges in using resin composites relies on the fact that
some materials possess stickiness during their clinical application, so that the
professionals are using some methods in order to minimize this task, such as the
use of flow resins (modeler liquid/LM) to facilitate the modeling of the material in
the tooth. However, little is known about the effects of the LM on the optical
properties of the restoration. Hence, the aim of this study was to evaluate the
effect of diferente modeler liquids on the color and translucency of a resin
composite. Twenty-four specimens of the resin composite FiltekTM Z250 (3M
ESPE), color shade A1, were prepared (5 mm diameter × 1.5 mm thickness). The
specimens were prepared varying the LM type: SBMP – Scotchbond adhesive
(3M ESPE); APS – Ambar APS adhesive (FGM); RESILAB – commercial
modeler resin (Wilcos); and Control – none LM was used. For the specimens
containing LM, it was used to model the resin composite into the mold, where one
drop of material was applied together with the resin increment. Light-activation
was performed in all specimens for 20 s at the top and bottom surfaces. The
specimens were evaluated by means of color and translucency analyses using a
digital spectrophotometer (Easyshade; VITA) and the CIEL * a * b * color system.
Next, all the specimens were immersed in distilled water for 180 days, with new
color and translucency measurements being obtained after 1, 7, 30, 90 and 180
days. Each LM was individually characterized with translucency, refractive index
and water contact angle analyses. All data were statistically analyzed using
ANOVA and Tukey (α=5%). The translucency of specimens increased
significantly after 1 day of water storage for all groups, except SBMP. After 180
days of water storage, all the groups demonstrated translucency values similar
to baseline, except Ambar APS group, which kept the more translucent one. The
color alteration results demonstrated that after only 1 day of immersion, the
control and RESILAB groups had values similar or greater to 3.3 (reference
value). After the immersion period, both RESILAB and SBMP showed color
alteration similar to each other (p=0.499) and greater than the others (p<0.001).
Each LM showed differences regarding their color, translucency, refractive index
and hidrophilicity characteristics. In conclusion, modeler liquids may be used
during the build-up of resin composite restorations without jeopardizing the
optical properties of the restorative material. However, formulations the less
hydrophilic as possible should be considered.
Description
Citation
Collections
Endorsement
Review
Supplemented By
Referenced By
Creative Commons license
Except where otherwise noted, this item's license is described as Acesso Aberto

