Produção de materiais mulíticos porosos pelo método de réplica e pesquisa sobre suas aplicações na implantologia óssea
Loading...
Date
Authors
Journal Title
Journal ISSN
Volume Title
Publisher
Universidade Federal de Juiz de Fora (UFJF)
DOI
Abstract
The first purpose of this work is to investigate the mechanical properties and the morphological
and microstructural characteristics that favor the application in bone implants to
evaluate the viability of the use of mullite in this application. The second aim, in turn,
was to obtain some of the required properties by performing three experiments to produce
porous ceramic materials with the presence of mullite, using kaolin as the raw material
and the polymeric sponge replica method as the manufacturing technique. Burning for
sponge decomposition and subsequent sintering of the ceramic material consisted of 4
phases: heating at a rate of 0, 90oC/min from room temperature (approximately 25oC)
to 400oC; heating at a rate of 10oC/min from 400oC to 1000oC; maintenance of the oven
at a temperature of 1000oC; and cooling the sample to room temperature. At the end
of Experiment 1, an X-ray diffraction analysis indicated the presence of mullite along
with other crystalline phases of the Al2O3-SiO2 system. Also in Experiment 1, it was
observed, visually, the fragility presented by the material produced. With this information,
further experiments were performed, changing some conditions such as the number of
dips (Experiment 2) and the use of binder in the suspension (Experiment 3), aiming at
the production of more resistant porous ceramic materials. At the end of Experiment 3,
the average pore size of (0, 4 ± 0, 1)mm and the average porosity of 79% of the samples
produced were obtained. Another purpose of this work is to investigate the feasibility
of using porous ceramic materials constituted predominantly by the mullitic phase in
bone implants. For this research the mechanical properties and the morphological and
microstructural characteristics that favor the application in bone implants and which of
these aspects the mullite presents, as well as examples of its applications in this area were
raised. The applications of other ceramic materials in the area of bone implantology were
also researched.
Description
Keywords
Citation
Collections
Endorsement
Review
Supplemented By
Referenced By
Creative Commons license
Except where otherwise noted, this item's license is described as Acesso Aberto

