Avaliação experimental do deterioramento mecânico do concreto causado por perfurações
Loading...
Date
Authors
Journal Title
Journal ISSN
Volume Title
Publisher
Universidade Federal de Juiz de Fora (UFJF)
Abstract
The presence of holes in reinforced concrete elements, necessary for various
purposes, is addressed by the ABNT NBR 6118:2023 standard, which serves as a
reference for indicating special regions for drilling and dimensional limits for holes in
structural elements. However, such interventions generate shock waves and vibrations
that induce internal damage to the material, such as microcracks and spalling. In this
context, this study experimentally investigates the loss of mechanical strength in
beams subjected to drilling by impact equipment, such as hammer drills and rotary
drills, through tests on concrete specimens. After preliminary tests, nine specimens
were constructed in a prismatic shape with rectangular bases, approximately
proportional to commonly used concrete beams in various civil construction projects,
respecting the physical similarity rules between physical models. After drilling holes in
the specimens using a hammer drill, mechanical alterations were evaluated using two
distinct methodologies: ultrasound testing along the entire length of the specimens to
measure differences in the dynamic modulus of elasticity before and after drilling; and
analysis of variations in the natural frequencies of the tested specimens, as reductions
in these frequencies are commonly associated with damage. The results indicated a
maximum reduction of 17.5% and a minimum of 5.1% in the modulus of elasticity for
the tested specimens, representing significant changes in the mechanical properties
of the concrete. In the analysis based on natural frequencies, an average reduction of
12% in the obtained values was observed, reflecting stiffness reductions in the
specimens. Finally, based on the obtained data, an equation was proposed to estimate
the reduction in the modulus of elasticity as a function of drilling, in addition to
recommending the type of drilling, among those analyzed, that causes the least
damage to the specimens.
Description
Citation
Collections
Endorsement
Review
Supplemented By
Referenced By
Creative Commons license
Except where otherwise noted, this item's license is described as Acesso Aberto

