Desenvolvimento de ferramentas para análise de regime permanente de microrredes ilhadas
Loading...
Date
Authors
Journal Title
Journal ISSN
Volume Title
Publisher
Universidade Federal de Juiz de Fora (UFJF)
Abstract
This work aims to propose a Power Flow (PF) and an Optimal Power Flow (OPF) based
tools for steady-state microgrids assessment. More specifically, voltage control schemes
were developed to coordinate reactive power injection to improve voltage profile, while
maintaining a reactive margin for emergency scenarios.
Firstly, this work proposes a modified Governor OPF formulation for the particular
aspects of microgrids. This modification focuses on an alternative behavior for the voltage
variations in the generation bus profile during the solution process. As generators normally
presented in microgrids are from alternative energy sources, which are usually connected
via power electronics devices, they can emulate the voltage control normally presented
in synchronous generators through gains, or voltage/reactive power droops. Therefore,
this work proposes the addition of an equation that represents the aforementioned droops
in the OPF problem. Also, this work proposes a change in the verification of reactive
power generation limits during OPF solutions, through complementarity constraints, to
accommodate the new behavior of the voltage profile of the generation buses. It will be
seen such methodology can be seen as a generalization of the generators’ representation in
the OPF problem.
Next, this work proposes a methodology based on sigmoid functions for the representation
of hierarchical control schemes, as well as control schemes whose equation is defined by
parts. The sigmoid functions built according to the control variables form equations that
represent the steady-state behavior of these devices, in a way that eliminates the need for
any change in the control equations externally to the Jacobian matrix. Therefore, this
methodology is resolved completely by the full Newton method and the sigmoid functions
aim to deactivate or activate the equations to automatically move between the control’s
operating ranges. Thus, control schemes aimed at maintaining reactive power margins for
emergency scenarios, as static var compensator and reactive limits verification, which are
control schemes whose equations are defined by parts, will be used to show the effectiveness
of the method.
For tests and validation purposes, the following test systems will be used: a 61-bus test
microgrid, the IEEE 39-bus New-England test system and an 11-bus, an 2 areas test
system and the Nordic system. The methodologies were implemented in Matlab ®
. The
results demonstrate the efficiency and robustness of the proposed methods.
Description
Citation
Collections
Endorsement
Review
Supplemented By
Referenced By
Creative Commons license
Except where otherwise noted, this item's license is described as Acesso Aberto

