Modelagem matemática e computacional do contato lubrificado de superfícies em mancais de rolamentos
Loading...
Date
Journal Title
Journal ISSN
Volume Title
Publisher
Universidade Federal de Juiz de Fora (UFJF)
DOI
Abstract
Due to the main cause of failure, inadequate lubrication in one of the mechanical
components most used in industrial machinery, electric and combustion motor, hydraulic,
steam and wind turbines, in this work the mathematical and computational
model is presented by Abaqus®
of the lubricated contact between the rough surface
of a sphere with the rigid plane, which corresponds to the outer ring track, both
components of a rolling bearing. The aim is to analyze the relationship between the
slip friction and the shear stresses produced from the lubricated contact between
the roughness of the surfaces, on a microscopic scale. It is considered the model
of the solid-solid contact without lubrication and the solid-fluid in the regimen of
hydrodynamic and mixed lubrication. As input data, the geometry, the properties
of the materials making up the moving parts and the relative velocities are applied.
And as outputs, the responses in terms of normal and tangential forces, normal and
shear stresses, and contact and fluid pressures are obtained. The results demonstrate
that the computational model allows to verify the effects of the presence
of the lubrication in the contact of surfaces. As the estimated values, through
computational simulation, for the coefficients of friction in the hydrodynamic and
mixed lubrication regime (close to 0,0045 and 0,014, respectively) presented high
precision, that is, they were within the reference range specified in the literature.
Description
Citation
Endorsement
Review
Supplemented By
Referenced By
Rights and licensing
Acesso Aberto
