Análise de propriedades químicas e mecânicas de diferentes resinas compostas quando mantidas em temperatura de refrigerador e ambiente
Loading...
Date
Authors
Journal Title
Journal ISSN
Volume Title
Publisher
Universidade Federal de Juiz de Fora (UFJF)
Abstract
Resin composites are widely used in dental practice to restore contour, function,
and esthetics. They can be handled at different temperatures and must support
the conditions of the oral cavity. This in vitro study evaluated the degree of
conversion (FTIR/ATR), sorption and solubility (ISO 4049: 2000) and surface
hardness (Koop) of seven composite resins (Filtek Z100, Z250, 350, One Bulk
Fill, Bulk Fill Flow, Universal and P60) polymerized under two different conditions:
1 – temperature: ambient (25°C) or refrigerated (5°C); and 2 – storage: 7 days
and 30 days. The samples were obtained using a cylindrical silicone mold with
internal dimensions of 6mm in diameter and 1mm in depth and were polymerized
for 20s using a LED device (VALO Cordless LED). The degree of conversion was
analyzed by ANOVA on ranks and Student-Newman-Keuls test. The other results
were analyzed by two-way ANOVA for repeated measures and Tukey's test. The
association between the characteristics of resin composites and the beneficial
potential of using the materials at 25°C or 5°C was performed using the Chisquare test. The results were correlated using the Pearson correlation test. The
level of significance for all analyses was 5%. All materials showed higher degree
of conversion at 25°C. Greater sorption and solubility were observed at 25°C and
after 30 days. Greater hardness results were observed at 25°C and after 7 days.
Considering the clinical indication, the materials indicated for the posterior region
had greater potential to increase hardness when stored at room temperature
(p=0.047), while materials for universal use preented greater potential to reduce
sorption and solubility at room temperature (p=0.047) Microhybrid materials
showed greater potential for reducing solubility when compared to
nanoparticulate materials (p=0.047). Resins with greater amount of particles
showed higher ability to reduce solubility (p=0.008). Finally, it was observed that
the greater the degree of conversion achieved by the material, a higher hardness
should be expected.
Description
Keywords
Citation
Collections
Endorsement
Review
Supplemented By
Referenced By
Creative Commons license
Except where otherwise noted, this item's license is described as Acesso Aberto

