Análise da influência dos parâmetros de corte na qualidade superficial no torneamento cilíndrico do alumínio 6351-T6 no corte a seco e com fluido lubrificante
Loading...
Date
Journal Title
Journal ISSN
Volume Title
Publisher
Universidade Federal de Juiz de Fora (UFJF)
DOI
Abstract
The increase of pruduct quality, delivery time and productivity of machined parts are the
main challenges of machining. Thereby, there was an increasing in studying and optimizing
machining conditions that meet the requirements of a good manufacture. Surface quality
is considered one of the most important features in the analysis of manufacturing criteria.
Surface roughness assumes an essential effect on wear resistance, ductility, fatigue strength
among others. Seeing the importance of roughness, This work aims to study the influence
of depth of cut, feed and rotation on surface roughness in the cylindrical turning of
aluminum, which is a widely used material in the industry. The analysis was done for dry
turning and one for turning using a lubricant. In both cases, two cutting tools were used,
one with radius 0.4 mm and one with 0.8 mm. The parameters were evaluated jointly
using the methodology called DOE (Design of Experiments). The results showed that the
feed and the tool radius were the ones that most influenced the roughness and the use or
not of cutting fluid is negligible. Regarding optimization, the levels of the factors that
ensured the best results were 460 rpm rotation, 0.156 mm / rev feed, 0.15 mm cutting
depth, 0.8 mm nose radius and environment with cutting fluid. Futhermore, the regression
model found for roughness Ra and Rz had an accuracy of 96,76 and 91,21%, respectively.
Description
Keywords
Citation
Collections
Endorsement
Review
Supplemented By
Referenced By
Creative Commons license
Except where otherwise noted, this item's license is described as Acesso Aberto

