Influência da densidade de corrente e do tempo de exposição na modificação de superfícies de titânio por polarização catódica
Loading...
Date
Authors
Journal Title
Journal ISSN
Volume Title
Publisher
Universidade Federal de Juiz de Fora - Campus Avançado de Governador Valadares
DOI
Abstract
Titanium implants represent successful alternatives for bone and dental replacement
in healthy patients. Modifications on the surface can increase their bioactivity and bone
regeneration, with a consequent impact on the implant survival rate, and the
modification technique used can impact the cellular response. The aim of this study
was to characterized titanium surfaces modified by the cathodic polarization method
with different current densities and exposure times. Seventy-two blocks of pretreated
pure titanium were used and randomly allocated in four experimental groups, being 18
samples for group. The cathodic polarization process was conducted in a solution of
acetic acid and sodium acetate (pH 3), being the titanium specimens used as cathode
and a rectangular platinum as anode at a controlled temperature of 22°C. The current
densities were 1.6 mA/cm 2 and 4.5 mA/cm 2 and the exposure times were 2h and 4h.
Samples were dried and maintained in a Nitrogen vacuum chamber. The modified
titanium samples were topographically characterized using Atomic Force Microscopy
(AFM), Scanning Electron Microscopy (SEM) and Energy Dispersion X-Ray
Spectroscopy (EDX). Water contact angles formed in the surface of the titanium were
measured with a tensiometer (ThetaLite TL101; Biolin Scientific Inc., Finland) using
the sessile drop method, in four different times in minutes: t=0, t=15, t=30 and t=45.
The contact angle formed between the water droplet and the surface was monitored in
real time for 60 seconds. AFM and SEM analysis showed rougher surfaces in the
modified groups. EDX data revealed the presence of sodium, carbon, and titanium
mainly. The Wettability test indicated that all groups showed contact angles with less
than 90°. The Control Group and Group 3 showed higher contact angles, around 76°
to 71° and Groups 1 and 2 lower contact angles, around 66° to 63° respectively. The
topography analysis showed higher roughness in the groups with higher current
density and exposure time. The electrochemical cathodic polarization technique
modified the titanium surfaces. Current density and exposure time used during the
modification process influenced roughness and wettability of the surface of the treated
titanium.
Description
Citation
Collections
Endorsement
Review
Supplemented By
Referenced By
Creative Commons license
Except where otherwise noted, this item's license is described as Acesso Embargado

