Propriedades mecânicas e químicas de resinas compostas fluidas com diferentes estratégias adesivas
Loading...
Date
Journal Title
Journal ISSN
Volume Title
Publisher
Universidade Federal de Juiz de Fora - Campus Avançado de Governador Valadares
DOI
Abstract
Flowable composite resins are widely used in restorative dentistry, and more recently,
self-adhesive flowable composites have been introduced, eliminating the need for
separate adhesive systems. This study compared the degree of conversion and
surface microhardness of a conventional flowable composite (YFlow) and a self-
adhesive flowable composite (YFlow SA), both from the Yller brand. Specimens (n = 5
per group) were fabricated with standardized dimensions (5 mm in diameter and 2 mm
in thickness). The degree of conversion was evaluated using FTIR spectroscopy,
analyzing the absorption band intensity at 1636 cm−1 before and after polymerization.
Microhardness was measured using a Vickers microhardness tester with a 50 g load
for 45 seconds. Data were statistically analyzed using Student’s t-test (α = 0.05). The
results showed that the self-adhesive resin had significantly higher values in both
degree of conversion (73.6% ± 2.8) and microhardness (39.9 HV ± 1.9) compared to
the conventional resin (56.2% ± 4.6 and 36.7 HV ± 2.2, respectively), with p < 0.05 for
both comparisons. Within the limitations of this study, it can be concluded that the self-
adhesive flowable resin performed better in the evaluated properties. Differences in its
chemical composition are likely responsible for these results. However, further studies
are needed to assess other material properties as well as clinical studies to evaluate
the performance of these resins under real clinical conditions.
Description
Citation
Collections
Endorsement
Review
Supplemented By
Referenced By
Creative Commons license
Except where otherwise noted, this item's license is described as Acesso Aberto

