Controladores led CA-CCde dupla função com VLC e interruptor único
Loading...
Date
Authors
Journal Title
Journal ISSN
Volume Title
Publisher
Universidade Federal de Juiz de Fora (UFJF)
Abstract
This document proposes a doctoral thesis that aims to contribute to the development of visible light communication (VLC) transmitters by developing dual-purpose
LED drivers, powered from the AC mains with a single switch, that enables both
lighting and data transmission. The proposed solutions present new approaches for
low-data-rate transmitters using FSK (Frequency-shift keying) modulation. The first
VLC transmitter alternative is based on power factor correction (PFC) flyback circuit
operating in discontinuous conduction mode (DCM). The role of the converter is to
regulate the average output current via the duty cycle value for lighting purposes and
to modulate digital data by means of the first switching harmonic of the output current. Both features can be achieved simultaneously by modulating the PWM signal fed
to the single-switch of the flyback converter. In order to allow for the transmission of
VLC data, the converter output low-pass filter has been replaced by a 3rd order bandstop (notch) filter and an additional feedforward loop was introduced. This strategy
maintains the simplicity of the original topology while granting it the functionality of
transmitting VLC data with a reduced component count. Experimental results taken
from a 14-W prototype supplied from a 127-V 60-Hz grid were carried out in order
to verify the modulation scheme and the feasiblity of the VLC transmitter, which was
able to transfer data with a bit rate of 15 kb/s over a distance of 2 m with a global
efficiency of 93.3%. Following this, a performance study of the VLC system was carried out for three different types of waveform, revealing that the square wave is less
susceptible to noise. The second VLC transmitter alternative employs a buck-boost
flyback topology. This configuration utilizes a PFC stage operating in DCM mode
to achieve a high power factor and a PC stage operating in CCM mode without an
output capacitor. This setup enables a square waveform in the LED current without
the need for an additional switch. Comprehensive experimental results were obtained
for a 35 W prototype powered from a universal input (90 to 264-V 60 Hz), validating
the operation across the entire operating range and evaluating the performance of the
VLC transmitter under nominal input voltage conditions. These results demonstrate
the feasibility of achieving data transmission rates of up to 248 kb/s over a distance of
up to 3 m with an overall peak efficiency of 82.7%. Finally, the main contributions of
the thesis are discussed and some proposals for future work are presented.
Description
Keywords
Comunicação por luz visível (VLC) , Conversor flyback , Diodos emissores de luz (LED) , Correção de fator de potência (PFC) , Comunicação digital , Modulação baseada em FSK , Visible light communications (VLC). , Visible light communications (VLC).Flyback converter. Light-emitting diode (LED). Power factor correction (PFC). Digital communication. FSK-based modulation
Citation
Collections
Endorsement
Review
Supplemented By
Referenced By
Creative Commons license
Except where otherwise noted, this item's license is described as Acesso Aberto

