Investigação teórica do efeito de impurezas substitucionais no bulk de silício na presença de lítio
Loading...
Date
Authors
Journal Title
Journal ISSN
Volume Title
Publisher
Universidade Federal de Juiz de Fora (UFJF)
DOI
Abstract
In the context of the search for improving the performance, capacity, and efficiency
of lithium-ion batteries (LIBs), the replacement of the graphite anode presents itself
as a promising alternative. Silicon (Si) has shown results that indicate that it is an
excellent candidate to replace graphite as the anodic material, mainly due to its specific
theoretical charge storage capacity, which is about ten times the reported value for graphite.
However, Si suffers from a significant volume expansion of about 300% under stress induced
by lithiation. This undesirable volume change causes the presence of an unstable and
cumulative solid electrolyte interface (SEI), breakage, and cracking of the electrodes,
resulting in a battery with low capacity and cyclability. A second limiting factor for the
use of Si is associated with its low electronic conductivity. The volume change is considered
the main limiting factor for the use of Si as an anodic material and is directly linked to
the emergence of Si-Li alloys in the electrode. The presence of lithium (Li) in silicon-based
structures results in the breaking of Si-Si bonds and the emergence of Si-Li alloys that are
weaker than crystalline Si in terms of yield strength, causing the amorphous Li-Si alloy to
move away from the biphasic crystalline/amorphous interface as it starts to expand.
In this work, we seek to evaluate, through first-principles calculations based on Density
Functional Theory (DFT), the effects on rigidity, stability, and electronic conductivity
with the introduction of substitutional impurities in the bulk Si structure in conjunction
with substitutional lithium atoms. Rigidity, stability, and electronic conduction were
analyzed through the information on bulk modulus, cohesive energy, band structure,
and density of states, respectively. Initially, we chose substitutional sites present in the
diamond bulk silicon structure and performed the single-atomic inclusion of impurities
with boron (B), carbon (C), nitrogen (N), aluminum (Al), and phosphorus (P) atoms.
Subsequently, we propose the insertion of pairs of the same impurity in first and second
neighbor configurations. We verified that the existence of pairs of substitutional impurities,
as well as their position within the structure, alters rigidity and electronic conductivity.
This alteration was verified through calculations of bulk modulus and density of states. The
results indicated that the inclusion of boron, carbon, and nitrogen was able to significantly
enhance the bulk modulus and cohesive energy values, thereby increasing the stability and
rigidity of the Si structure, unlike aluminum and phosphorus. All the impurities under
analysis (B, C, N, Al, and P) were capable of improving the electronic conduction of silicon
by altering its semiconductor character to a metallic character.
The second step focused on the study of the combination of lithium atoms and impurities
from the chosen substitutional sites. Based on bond length analyses, we proposed a
relationship between the stability and rigidity of the structures according to the value of
the bond length between the impurity and Li. The analyses indicated that the impurity
with the highest value of bond length with Li causes a greater reduction of the bulk
modulus and cohesive energy, suggesting a more significant structural change of the
compound. Seeking information to corroborate the idea of structural change, we evaluated
the value of the angular coefficient of the line of the graphs of cohesive energy and bulk
modulus associated with the Si bulk structures with the impurities and the Li atoms in the
substitutional sites through a linear fit. We believe that the structures with the angular
coefficient values of the cohesive energy and bulk modulus closest to zero can more easily
accommodate lithium atoms, resulting in fewer structural problems. From this perspective,
the inclusion of nitrogen and phosphorus in the silicon structure proved to be favorable,
as these chemical elements indicated, in our results, that they are capable of reducing the
structural damage caused by Li.
Description
Keywords
Citation
Collections
Endorsement
Review
Supplemented By
Referenced By
Creative Commons license
Except where otherwise noted, this item's license is described as Acesso Aberto

