Estimação de fasores harmônicos baseada em banco de filtros polifásicos: implementação em FPGA com processador embarcado

dc.contributor.advisor1Silva, Leandro Rodrigues Manso
dc.contributor.advisor1Latteshttp://lattes.cnpq.br/1421239770201461pt_BR
dc.contributor.referee1Monteiro, Henrique Luis Moreira
dc.contributor.referee1Latteshttp://lattes.cnpq.br/5267607111591267pt_BR
dc.contributor.referee2Andrade Filho, Luciano Manhães de
dc.contributor.referee2Latteshttp://lattes.cnpq.br/5454168673866452pt_BR
dc.creatorRapozo, Ricardo Rodrigues
dc.creator.Latteshttp://lattes.cnpq.br/2498430000407021pt_BR
dc.date.accessioned2026-11-13T11:51:06Z
dc.date.available2026-11-12
dc.date.available2026-11-13T11:51:06Z
dc.date.issued2026-09-15
dc.description.abstractThe growing number of nonlinear loads and power electronics based sources makes the voltages and currents in the power grid move away from the ideal sinusoidal waveform, so it becomes important to estimate not only the fundamental component but also the harmonic components of the signal. This task becomes harder when the fundamental frequency deviates from its nominal value, since the phase error grows with the harmonic order. This work presents and implements a harmonic phasor estimation method for signals with varying frequency, made up of three stages: frequency estimation by zero crossing, smoothed by a Kalman filter; dynamic resampling of the signal by B-Spline interpolation in a Farrow structure; and harmonic extraction by a Flat-Top filter bank with polyphase decomposition, followed by an IDFT. Thanks to the resampling, the filter bank always works with the nominal number of samples per cycle and its coefficients do not need to be recomputed. The method was first developed as a reference model in Python and then implemented on two soft-core processors of the SAPHO platform, one for the interpolator and one for the filter bank, which communicate through FIFO memories and are coordinated by a state machine. During the implementation, some stages had to be adjusted because of the 32-bit arithmetic of the processor, such as the Kalman filter and the period calculation in the zero crossing estimator. The implementation was validated by functional simulation and compared with the reference model in tests based on the IEC/IEEE 60255-118-1 standard, with off-nominal frequency, frequency ramp and modulation. The frequency was estimated accurately in all tests. In the off-nominal case, the reference model stayed below the 1% TVE limit over the whole range evaluated, and the embedded implementation only exceeded this limit at the highest harmonic orders. The results showed that this difference comes mainly from the time misalignment between the signal and the frequency used in the phase correction, and not from the numerical precision of the filter bank. In the ramp test, on the other hand, the reference model itself exceeds the limit at the highest orders, which points to a limitation of the method under continuous frequency variation. Overall, the results show that the method is feasible on an embedded platform and indicate where it can still be improved.pt_BR
dc.description.resumoA presença cada vez maior de cargas não lineares e de fontes conectadas por eletrônica de potência faz com que as tensões e correntes da rede elétrica se afastem da forma senoidal ideal, o que torna importante estimar não só a componente fundamental, mas também as componentes harmônicas do sinal. Essa estimação fica mais difícil quando a frequência fundamental se desvia do valor nominal, já que o erro de fase cresce com a ordem harmônica. Este trabalho apresenta e implementa uma metodologia de estimação de fasores harmônicos para sinais com frequência variável, formada por três etapas: estimação da frequência por cruzamento por zero, com suavização por filtro de Kalman; reamostragem dinâmica do sinal por interpolação B-Spline em estrutura de Farrow; e extração das harmônicas por um banco de filtros Flat-Top com decomposição polifásica, seguido de uma IDFT. Com a reamostragem, o banco de filtros trabalha sempre com o número nominal de pontos por ciclo, sem precisar ter seus coeficientes recalculados. A metodologia foi desenvolvida primeiro como um modelo de referência em Python e, depois, implementada em dois processadores soft-core da plataforma SAPHO, um dedicado ao interpolador e outro ao banco de filtros, que se comunicam por memórias FIFO e são coordenados por uma máquina de estados. Durante a implementação, foi preciso ajustar algumas etapas por conta da aritmética de 32 bits do processador, como o filtro de Kalman e o cálculo do período no cruzamento por zero. A implementação foi validada por simulação funcional e comparada com o modelo de referência em ensaios inspirados na norma IEC/IEEE 60255- 118-1, com frequência fora da nominal, rampa de frequência e modulação. A frequência foi estimada com boa precisão em todos os ensaios. Na condição fora da nominal, o modelo de referência ficou abaixo do limite de 1% de TVE em toda a faixa avaliada, e a implementação embarcada só ultrapassou esse limite nas ordens harmônicas mais altas. Os resultados mostraram que essa diferença vem principalmente do desalinhamento temporal entre o sinal e a frequência usada na correção de fase, e não da precisão numérica do banco. Já no ensaio de rampa, o próprio modelo ultrapassa o limite nas ordens mais altas, o que indica uma limitação da metodologia sob variação contínua de frequência. De forma geral, os resultados mostram que a metodologia é viável em plataforma embarcada e apontam onde ela ainda pode ser melhorada.pt_BR
dc.identifier.urihttps://repositorio.ufjf.br/handle/ufjf/21663
dc.languageporpt_BR
dc.publisherUniversidade Federal de Juiz de Fora (UFJF)pt_BR
dc.publisher.countryBrasilpt_BR
dc.publisher.departmentFaculdade de Engenhariapt_BR
dc.publisher.initialsUFJFpt_BR
dc.publisher.programPrograma de Pós-graduação em Engenharia Elétricapt_BR
dc.rightsAcesso Abertopt_BR
dc.rights.urihttps://creativecommons.org/licenses/by-nd/4.0/pt_BR
dc.subjectEstimação fasorial harmônicapt_BR
dc.subjectInterpolação B-Splinpt_BR
dc.subjectTVE-erro vetorial totalpt_BR
dc.subjectFFT-fast fourier transformpt_BR
dc.subjectHarmonic phasor estimationpt_BR
dc.subjectB-Spline interpolationpt_BR
dc.subjectTotal vector error (TVE)pt_BR
dc.subjectFast fourier transform (FFT)pt_BR
dc.subject.cnpqCNPQ::ENGENHARIAS::ENGENHARIA ELETRICApt_BR
dc.titleEstimação de fasores harmônicos baseada em banco de filtros polifásicos: implementação em FPGA com processador embarcadopt_BR
dc.typeDissertaçãopt_BR

Files

Original bundle

Now showing 1 - 1 of 1
Loading...
Thumbnail Image
Name:
ricardorodriguesrapozo.pdf
Size:
29.14 MB
Format:
Adobe Portable Document Format
Description:
PDF/A

License bundle

Now showing 1 - 1 of 1
Loading...
Thumbnail Image
Name:
license.txt
Size:
1.71 KB
Format:
Item-specific license agreed upon to submission
Description: