Conversor CA.-CC. flyback com elevado fator de potência orientado ao acionamento de LEDs de potência
Loading...
Date
Authors
Journal Title
Journal ISSN
Volume Title
Publisher
Universidade Federal de Juiz de Fora (UFJF)
DOI
Abstract
This work aims to study, design, simulate and obtain experimental results from a
flyback converter operating in discontinuous mode (DCM), to trigger a fixture of light
emitting diodes (LEDs). Furthermore, it is desired that the converter has high power factor,
high efficiency, low harmonic distortion of input current, high life (through the possibility of
replacing the electrolytic capacitors for metal film capacitors) and low cost. Initially, the
paper presents a brief study of lighting LEDs, LEDs for simplified electrical model, as well as
a review of some converters used to drive this type of light source. Then it analyzed the
operation of the flyback converter in DCM mode fed from the rectification (bridged) the
utility voltage. Besides the theoretical study, the simulation of the converter is presented in
order to validate the design of the converter as a basis for comparison with experimental
results. The transformer design (coupled inductors) flyback converter has special emphasis in
this work, because this element is essential to raise the efficiency of the converter. So part of
this work is devoted to the study of transformer losses. This is done by an adaptation of
standard techniques in this area via a teaching order to build repeatability study. From the
theoretical study on the losses in the transformer, programs developed in MATLAB and
MICROSOFT EXCEL aid the design of the magnetic element of the flyback converter. These
two programs are designed to facilitate the comprehensive equating of losses and assist in
developing a project with high efficiency flyback transformer raising therefore the overall
efficiency of the converter. Employing the programs drawn up, the project is calculated and
experimental results are obtained from measurements performed on a prototype scale. These
results are analyzed and compared with the theoretical results and simulation. At the end we
provide a simplified analysis of the cost of the converter components and also presents the
main conclusions of this work.
Description
Keywords
Diodos emissores de luz , Correção ativa do fator de potência , Acionamentos eletrônicos para LEDs , Resistência CA , Resistência efetiva , Circuitos magnéticos , Efeito de proximidade , Efeito pelicular , Light emitting diodes , Active correction of the power factor , Electronic drives for LEDs , AC Resistance , Effective resistance
Citation
Endorsement
Review
Supplemented By
Referenced By
Rights and licensing
Acesso Aberto
